How to Read a Water Test Report
A water test report lists each substance, the amount found, the unit, and the limit it is judged against, so reading it means comparing each result to that limit. Health items are held to primary standards (MCLs) while taste, color and staining items are held to secondary guidelines, and we are glad to walk through any report with you.
Key points
- Every line has three parts: the substance, the result with its unit, and the limit.
- mg/L equals ppm and ug/L equals ppb; one grain per gallon is 17.1 mg/L of hardness.
- Primary standards (MCLs) cover health; secondary guidelines cover taste, odor, color and staining.
- Test, then treat only what the report shows.

Lab reports come back as a page of abbreviations, and it is easy to feel like you need a chemistry degree. You do not. Once you know the three columns that matter and the handful of units labs use, a report becomes a short list of questions: which results are above their limit, which are close, and which are nothing to act on.
What are the columns on a water test report?
Nearly every report is laid out the same way. The first column names the substance, such as arsenic, nitrate, iron or total dissolved solids. The next gives your result and its unit. A third column shows the reporting limit (the smallest amount the lab can measure) or the drinking water limit. Some labs add a flag column that marks anything above a limit.
The Nevada Division of Environmental Protection publishes a plain-language guide, "Understanding Results," and a companion sheet, "Matching Problems to Treatment," that follow this same layout. If a result says ND or "less than" followed by a number, the lab did not detect that substance at or above its measuring limit, which is good news for that line.
What do mg/L, ppm, ug/L and ppb mean?
Milligrams per liter (mg/L) and parts per million (ppm) are the same thing for drinking water. Micrograms per liter (ug/L) and parts per billion (ppb) are also the same thing, and one mg/L equals 1,000 ug/L. So an arsenic result of 0.010 mg/L is the same as 10 ppb.
Hardness is the one place you will see grains. The U.S. Geological Survey scales hardness in mg/L as calcium carbonate, and softener settings are in grains per gallon. Our conversion is simple: divide mg/L by 17.1 to get grains per gallon. A hardness of 171 mg/L works out to 10 grains.
| Unit on the report | Same as | Where you see it |
|---|---|---|
| mg/L | ppm | Nitrate, iron, manganese, sulfate, TDS, hardness |
| ug/L | ppb | Arsenic, uranium, lead |
| pCi/L | picocuries per liter | Radon, gross alpha, radium |
| gpg | mg/L divided by 17.1 | Hardness, for softener settings |
Primary and secondary standards: which limit applies?
The EPA sets two kinds of limits. Primary standards, called maximum contaminant levels or MCLs, protect health. Secondary standards are guidelines for things that change the look, smell or taste of water or stain fixtures. They are not enforced federally, but they tell you when a treatment will make a visible difference. Utilities are judged on running averages across many samples, while a private well owner gets one snapshot, so a single result is a starting point for a retest rather than a verdict.
Here are the numbers we see most on Northern Nevada well reports, from the EPA's published lists:
| Substance | Limit | Type |
|---|---|---|
| Arsenic | 0.010 mg/L (10 ppb) | Primary |
| Nitrate | 10 mg/L as nitrogen | Primary |
| Uranium | 30 ug/L | Primary |
| Iron | 0.3 mg/L | Secondary |
| Manganese | 0.05 mg/L | Secondary |
| Sulfate | 250 mg/L | Secondary |
| Total dissolved solids | 500 mg/L | Secondary |
| pH | 6.5 to 8.5 | Secondary |
Some Nevada reports print state secondary limits that differ from the EPA numbers, such as 500 mg/L for sulfate or 1,000 mg/L for TDS. Compare against whichever limit your lab prints and keep its label with the number.
Which results should you look at first?
Start with the primary standards, because they are the ones tied to health. Arsenic, nitrate and uranium are the three that matter most for Northern Nevada wells, and none of them has a taste or smell, so the report is the only way to see them. Also look at the bacteria line: a coliform result other than absent means the well needs attention before anything else.
Then read the secondary items against what you see at home. Iron and manganese explain orange and black staining, hardness explains spots and scale, sulfate and TDS explain a flat or salty taste, and a low pH explains blue-green stains at copper fixtures. A result close to its limit is worth rechecking, since UNR Extension advises testing more often when a number sits near a standard.
- Above a primary limit: retest to confirm, then talk with a water treatment company about the right system.
- Close to a primary limit: retest within the year and watch the trend.
- Above a secondary guideline: treat if the symptom bothers you; it is an aesthetic item rather than a health one.
- Everything within limits: keep the report and retest on your schedule.
What Water Pros does with your report
Bring us the report or send a photo of it with the form on this page. We read it line by line, match each result to a symptom you have at home, and tell you which items are worth treating and which are fine to leave alone. You don't have to be an existing customer.
If you do not have a lab report yet, our free local basic testing covers hardness, iron and pH, and lab testing is typically required for well water. Our water testing page explains both steps. From there the fixes are straightforward: a softener for hardness, an iron filter for iron and manganese, well water treatment for the health items, and reverse osmosis at the kitchen tap. Our rule is test, then treat what the test finds, and we recommend a test after installation to confirm the numbers moved.
Sources (6)
- Nevada Division of Environmental Protection: ndep.nv.gov/uploads/water-labcert-dwtesting-docs/UnderstandingResults.pdf (checked November 2026)
- Nevada Division of Environmental Protection: ndep.nv.gov/uploads/water-labcert-dwtesting-docs/common_probs.pdf (checked November 2026)
- U.S. EPA: epa.gov/ground-water-and-drinking-water/national-primary-drinking-water-regulations (checked November 2026)
- U.S. EPA: epa.gov/sdwa/secondary-drinking-water-standards-guidance-nuisance-chemicals (checked November 2026)
- U.S. Geological Survey: usgs.gov/special-topics/water-science-school/science/hardness-water (checked November 2026)
- Nevada Division of Environmental Protection: ndep.nv.gov/uploads/water-labcert-dwtesting-docs/WellWaterTesting.pdf (checked November 2026)

