Northern Nevada Water Data
Water Pros, which tests water and installs treatment across Northern Nevada, keeps three sets of published figures here: hardness by town, arsenic, uranium and nitrate by town, and the federal standards they are measured against. Every number carries its utility report or agency and year, and private wells, which no report covers, need their own test.
How the tables are built
Every figure comes from the utility's own Consumer Confidence Report or water quality page, or from a U.S. Geological Survey report, and is quoted as printed. Where we convert hardness from mg/L to grains per gallon we divide by 17.1 and say so. Compliance with drinking water standards is judged on averages over time, so a single high sample in a report is not a violation.
What the two data pages show
The water hardness by town page lists hardness as calcium carbonate for every Northern Nevada system that publishes it, from the Truckee Meadows Water Authority's neighborhood lookup to the Town of Minden and Lyon County's Dayton Valley report, with grains per gallon beside each figure. Towns whose utilities post no hardness number are listed by name with what they do publish, and no number is guessed for them.
The arsenic, uranium and nitrate by town page sets each utility's reported result beside its range, its report year and the federal limit, with a short note on how compliance is judged. Both pages offer the tables as CSV downloads.
Private wells are tested by their owners
Utility reports describe the water a public system delivers. A private well has no report unless the owner orders a test, and the Nevada Division of Environmental Protection notes that private well water quality is not regulated by its Bureau of Safe Drinking Water. Renown Health counts about 41,000 people in Washoe and Churchill Counties on private well water, and a 2022 study by DRI, Renown and the University of Hawaii found 22% of the Nevada domestic wells it tested above the federal arsenic limit.
That is why every page here ends in the same place: test, then treat what the test finds. Our well water testing page explains what to order, and free local basic testing to include hardness, iron & pH is available whether you are on a well or city water.
Standards used
| Measure | Standard | Type |
|---|---|---|
| Arsenic | 0.010 mg/L (10 ppb) | EPA primary standard |
| Nitrate (as nitrogen) | 10 mg/L | EPA primary standard |
| Uranium | 30 ug/L | EPA primary standard |
| Hardness | Over 180 mg/L is very hard | USGS classification |
| Total dissolved solids | 500 mg/L | EPA secondary guideline |
Sources (6)
- U.S. EPA: epa.gov/ground-water-and-drinking-water/national-primary-drinking-water-regulations (checked November 2026)
- U.S. EPA: epa.gov/sdwa/secondary-drinking-water-standards-guidance-nuisance-chemicals (checked November 2026)
- U.S. Geological Survey: usgs.gov/special-topics/water-science-school/science/hardness-water (checked November 2026)
- Nevada Division of Environmental Protection: ndep.nv.gov/water/drinking-water/information-for-consumers/private-wells (checked November 2026)
- Renown Health: renown.org/about/newsroom/could-well-water-unlock-health-insights (checked November 2026)
- Phys.org: phys.org/news/2022-10-elevated-arsenic-metals-nevada-private.html (checked November 2026)

