Frequently Asked Questions
Water Pros installs, services and repairs water softeners, reverse osmosis drinking water systems and well water filtration across Northern Nevada, and here are the questions people ask us most, grouped by topic, each with a link to the page that goes deeper. Free local basic testing to include hardness, iron & pH is the place to start.
Water Quality Problems
Most water quality problems show up as something you can see, smell or taste, and each one points to a likely cause that a test can confirm. Water Pros tests your water for free for hardness, iron and pH and then recommends the treatment that fixes what the test finds.
Read about Water Quality ProblemsWhat Treatments are Right for Me?
The right water treatment depends on what is in your water, so the first step is always a water analysis. Water Pros starts with a free local basic test for hardness, iron and pH and helps you get a lab test when you need one.
Read about What Treatments are Right for Me?System Maintenance FAQ
All in-home water treatment equipment needs occasional attention, and many systems need replacement filters and membranes on a schedule. Water Pros answers the most common maintenance questions below and can set up a plan so you never have to track it yourself.
Read about System Maintenance FAQWater Treatment Glossary
This glossary explains the words you see on a water test report, a utility water-quality report and a treatment quote, in plain English. Each entry links to the Water Pros page that goes deeper, and our free local basic test covers hardness, iron and pH.
Read about Water Treatment GlossaryAbout Water Pros
What does Water Pros do?
Water Pros tests water and installs, maintains and repairs water treatment systems: water softeners, reverse osmosis drinking water systems and well water filters for iron, manganese, arsenic, nitrate, sulfur, sediment, radon and pH. We also replace filters and set up maintenance plans for homes and businesses.
Water testing
Is your water test really free?
Yes. Our local basic testing to include hardness, iron and pH is free. Lab testing for wells is done by a certified laboratory and is typically required for well water. More on water testing.
How often should I test my well?
We recommend an extensive water analysis every 3 to 5 years, because water quality changes as aquifers and ground water change. University of Nevada Extension also suggests checking nitrate, pH, total dissolved solids and coliform bacteria every year. More on water testing.
Can I tell if my water is safe by looking at it?
No. Many contaminants that matter for health, such as arsenic, nitrate and bacteria, cannot be seen, tasted or smelled. Only a lab test tells you. More on water testing.
Service, repair and maintenance
Do I have to be an existing customer?
No. You don't have to be an existing customer to receive our support, and we can service most water treatment equipment even if it was not installed by us. More on service & repair.
How do you charge for a service call?
A flat-rate service call fee, with no hourly labor charges and no fuel surcharges. You'll always know what to expect. More on service & repair.
What if the problem is not fixed on the first visit?
If your issue is not resolved during the initial visit, we will return at no additional charge to make it right. More on service & repair.
Does my water softener require servicing?
Yes. Once a year it should be inspected to make sure your water conditions are not getting worse. We also open the control valve, clean internal parts and check the brine draw and refill. More on system maintenance.
How often should greensand filter injectors be cleaned?
Depending on water conditions, they should be cleaned at least every 6 months. Areas with high iron or manganese need more frequent cleaning, because a plugged injector stops the system from working properly. More on system maintenance.
What is included in RO maintenance?
We replace the pre and post filters, sanitize the housing and faucet, test TDS to check the membrane and recharge the holding tank as needed. More on system maintenance.
How often should I change my sediment filter?
Sediment filters should be changed every 3 to 6 months, or when water pressure is affected. A money-saving option we provide for this is rinsable, reusable filters. More on filter replacement.
How often does my reverse osmosis need new filters?
We recommend changing the filters every 6 months, but not to exceed 1 year. We also sanitize the housing and faucet and test the water to confirm the membrane is working. More on filter replacement.
Why do you sanitize the housing?
Bacteria can form and breed in and on your filters and housings. Cleaning and sanitizing the housing means the new filter starts clean. More on filter replacement.
Softeners and hard water
How hard is water in Northern Nevada?
It depends on the street. TMWA zones in Reno run from about 1.9 to 13.9 grains per gallon, Minden from 5.5 to 8.2, and the Dayton system printed 11.59 to 29.76 grains. Private wells can be higher, so we test your tap. More on water softeners.
Does a water softener make water salty?
No. It swaps the hardness minerals for a small amount of sodium or potassium, not salt you can taste. If you want lower sodium for drinking, a reverse osmosis faucet takes care of that. More on water softeners.
How often does a softener need service?
Once a year it should be inspected to make sure your water conditions are not getting worse. We clean the valve, sanitize the media and salt tank and check the settings. More on water softeners.
Drinking water and reverse osmosis
Does reverse osmosis remove arsenic?
It reduces it, often a great deal. In a USGS study of 59 Lahontan Valley homes, RO removed an average of 80.2% of arsenic, but some homes with very high raw arsenic were still above 10 ppb after treatment. That is why we recommend testing the treated water, not just the well. More on reverse osmosis systems.
How often should RO filters be changed?
We recommend changing the filters every 6 months, and not going longer than a year. During the visit we also sanitize the housings and faucet, test TDS and recharge the tank. More on reverse osmosis systems.
Will RO fix a rotten-egg smell?
Usually not. Hydrogen sulfide is a dissolved gas and can pass through the membrane, so the smell is treated where water enters the house. RO then finishes your drinking water. More on reverse osmosis systems.
Does a charcoal filter remove chlorine?
Yes. Activated carbon is the standard way to remove chlorine taste and odor. It works until the carbon is used up, so cartridges need regular replacement. More on charcoal filtration.
How often do carbon filters need changing?
It depends on water use and how much chlorine or organic material is in the water. On our Big Blue service the carbon cartridge is replaced each visit, and RO carbon filters are changed with the other RO filters about every 6 months, not more than a year. More on charcoal filtration.
Will a carbon filter soften my water?
No. Carbon does not remove calcium and magnesium. Hard water needs a water softener. More on charcoal filtration.
What is a good TDS level for drinking water?
The EPA's secondary guideline is 500 mg/L, based on taste and appearance. Many people prefer drinking water well below that, which is what reverse osmosis delivers. The minerals that make up the number matter as much as the total. More on TDS Filtration.
Does a water softener reduce TDS?
No. A softener swaps calcium and magnesium for sodium or potassium, so total dissolved solids stay about the same. Reverse osmosis is the household treatment that lowers TDS. More on TDS Filtration.
How do you know my RO membrane is still working?
We test TDS at each service visit and compare it to the tap. When the treated water's TDS climbs, the membrane is due. Pre and post filters are changed every 6 months, not over a year. More on TDS Filtration.
Well water problems
Is iron in well water dangerous?
Iron is an aesthetic problem, not usually a health one. The EPA's 0.3 mg/L guideline is about staining and taste. It is still worth treating because it ruins fixtures, laundry and appliances. More on iron filtration.
What is the best iron filter media?
It depends on your iron, manganese, pH and any hydrogen sulfide. Birm needs a pH of 7 or above and no hydrogen sulfide; greensand handles iron with manganese. We choose after a test. More on iron filtration.
What is the legal limit for arsenic in drinking water?
The EPA's maximum contaminant level is 0.010 mg/L, or 10 ppb, in effect since January 23, 2006. It applies to public water systems; private well owners decide for themselves, which is why testing matters. More on arsenic filtration.
How do I know if my well has arsenic?
Only a lab test can tell you. Arsenic has no color, taste or smell. Nevada's NDEP lists State-certified labs that run private well tests. More on arsenic filtration.
What is the safe limit for nitrate?
The EPA limit for public water is 10 mg/L as nitrogen, and 1 mg/L for nitrite. Private well owners use the same number as a guide. More on nitrate filtration.
Does boiling remove nitrate?
No. Boiling evaporates water and leaves the nitrate behind, so the level goes up. Use reverse osmosis or ion exchange. More on nitrate filtration.
Why does my water smell like rotten eggs?
That is hydrogen sulfide gas. It comes either from the well itself or from a reaction inside the water heater. Smelling hot and cold water separately tells you which. More on sulfur filtration.
Is hydrogen sulfide in water dangerous?
At the levels found in household water it is mainly an odor and corrosion problem. Penn State Extension notes the nose detects it long before harmful levels. If the smell appears suddenly, test for bacteria too. More on sulfur filtration.
What causes black stains in my sink and toilet?
Black or dark brown stains usually point to manganese, often together with iron. A lab test confirms it and tells us which filter fits. More on manganese filtration.
Is manganese in drinking water harmful?
The EPA's 0.05 mg/L guideline is an aesthetic standard for staining and taste. Ask your doctor about health questions; we focus on measuring it and removing it. More on manganese filtration.
Is there a legal limit for radon in drinking water?
No federal limit is in effect for radon in water. The EPA has proposed a 4,000 pCi/L level for community water systems in states with an approved indoor-air radon program, and Lyon County's Dayton report cites it. The EPA does not regulate private wells, and Nevada's drinking water bureau does not regulate private well water quality. More on radon gas filtration.
Why treat radon in water if I drink very little of it?
The EPA notes that radon escapes from water into the air when you shower, wash dishes or cook, and some stays in the water. That is why radon systems treat the water at the point of entry, for the whole house. More on radon gas filtration.
What causes blue-green stains in my sink?
Green or blue stains are usually a combination of copper pipe and acidic water. The acid dissolves copper, which then stains fixtures. An acid neutralizer fixes the cause, after a test confirms the pH. More on pH Adjustment.
What pH should my water be?
The EPA's secondary guideline is 6.5 to 8.5. Below 6.5 the water tends to corrode copper and other metal plumbing. More on pH Adjustment.
How often should I test my well for bacteria?
The EPA and University of Nevada Cooperative Extension both advise testing for total coliform every year. Test again right away after a well repair, flooding or any change in the water. Retest after installing treatment to confirm it worked. More on bacteria filtration.
Does a UV system remove iron or hardness?
No. UV disinfects; it does not remove minerals. Iron, manganese, hardness and sediment can block the UV light, so they are treated first with the right filter or softener. More on bacteria filtration.
How often does a sediment filter on a well need a new cartridge?
Every 3 to 6 months, or when you notice the water pressure is affected. Wells that pump a lot of sand may need it sooner. A rinsable, reusable filter can cut the cost of frequent changes. More on sediment filtration.
What micron sediment filter do I need?
It depends on what is in the water. Sand needs a coarser filter, while silt needs a finer one, and on some wells two stages last longer than one very fine filter. We look at the sediment and the rest of your system before choosing. More on sediment filtration.
Is sulfate in well water dangerous?
The EPA treats sulfate as a secondary, taste-and-odor contaminant with a 250 mg/L guideline. The common complaint at higher levels is a bitter taste and a laxative effect for people who are not used to it. A test tells you where your water sits. More on sulfate filtration.
Will a water softener remove sulfate?
A standard softener trades out calcium and magnesium, not sulfate. Sulfate needs reverse osmosis or an anion exchange system. Some homes pair a softener with an anion unit when the water is both hard and high in sulfate. More on sulfate filtration.
Offering you the quality Water Treatment Services you deserve!
Free local basic testing to include hardness, iron & pH. Service on most water treatment systems, even ones we did not install.
or call 775-674-2871
★★★★★ 4.9 on Google from 55 reviews
Monday - Friday - 8am to 4:30pm

