---
title: "Low Pressure After a Filter or Softener | Water Pros NV"
url: "https://waterprosnv.com/water-quality-problems/low-water-pressure/"
canonical: "https://waterprosnv.com/water-quality-problems/low-water-pressure/"
updated: "2026-11-21"
breadcrumb: "Home > Water Quality Problems > Low Water Pressure After a Filter"
business: "Water Pros - Gardner's Water Service, Inc"
what: "water softeners, reverse osmosis drinking water systems, well water filtration (iron, manganese, arsenic, nitrate, sulfur, sediment, radon, pH), water testing, filter replacement, maintenance plans and service and repair"
phone: "775-674-2871"
email: "chris@waterprosnv.com"
hours: "Mon-Fri 8:00 am-4:30 pm; closed Sat-Sun"
since: "1990"
owned: "Veteran owned and operated; SBA Service-Disabled Veteran-Owned certified"
area: "Northern Nevada (service-area business)"
free_test: "free local basic testing to include hardness, iron & pH"
---

# Low Water Pressure After a Filter

Low pressure after a filter, softener or RO system most often comes from a clogged sediment filter that needs changing, and sometimes from tank pressure or a valve. We service most water treatment equipment, even systems we did not install, and our technicians carry common parts to repair most systems on the first visit.


## Where the Pressure Is Lost

Every filter adds a little resistance to the water flowing through it. A clean one is hardly noticeable. A loaded one, or one that is undersized for the household, can slow the whole house down. The first step is working out where in the house the problem shows up, because that points to the piece of equipment.

| What you notice | Where to look |
|---|---|
| Weak flow at every tap in the house | Whole-house sediment or Big Blue filter, softener, or the pressure tank on a well |
| Weak flow only at the kitchen RO faucet | RO filters, membrane or storage tank pressure |
| Weak flow only on the hot side | Water heater lines and fittings |
| Pressure dropped right after a new filter went in | Filter size, orientation or a closed bypass valve |
| Pressure drops during the softener's regeneration | Normal for a short time; a problem only if it lingers |

A quick test is to open the bypass on the treatment system, if it has one, and see whether pressure returns. If it does, the equipment is the restriction and a service visit will find which part.

## Clogged Sediment Filters

Sediment filters catch sand, silt, rust and other particles, so they do their job by slowly filling up. Our maintenance guidance is to change sediment filters every 3 to 6 months or when water pressure is affected, whichever comes first. A well with a lot of fine material or a house with heavy use may need them closer to the three-month mark.

If pressure fell gradually over weeks, a loaded cartridge is the most likely cause. If it fell overnight after the filter was changed, check that the housing is seated, the right cartridge is in it and the inlet and outlet valves are fully open. Our [filter replacement](https://waterprosnv.com/filter-replacement/) service handles the change for you, and [sediment filtration](https://waterprosnv.com/sediment-filtration/) explains how we choose the micron rating.

## RO Tank Pressure

A reverse osmosis system stores water in a small tank at the kitchen, and the tank has an air side that pushes water out to the faucet. When that air pressure drifts, the faucet runs weak or sputters, even though the water in the house is fine. Our RO maintenance checks the system pressure and recharges the holding tank as needed, and the filters are changed every 6 months.

If only the RO faucet is slow, it is not a house pressure problem. Our [reverse osmosis service](https://waterprosnv.com/service-repair/reverse-osmosis-service/) page lists what a visit covers, and the [why is my reverse osmosis slow](https://waterprosnv.com/guides/why-is-my-reverse-osmosis-slow/) guide goes into more detail.

## Softener and Valve Issues

Softeners can slow the flow when the resin bed is packed with sediment or iron, when a control valve or distributor is partly blocked, or when the bypass is not fully open after a service. Iron and sediment that arrive faster than the softener can handle are a common reason, which is why we look at the water test along with the equipment.

Our technicians carry common parts to repair most systems on the first visit. Start with [service and repair](https://waterprosnv.com/service-repair/), and our visit includes a flat-rate service call fee with no hourly labor charges and no fuel surcharges. If we need to come back for something, we will return at no additional charge.

## Low Water Pressure After a Filter: Questions

### How often should I change a sediment filter?

We recommend every 3 to 6 months, or when water pressure is affected. Wells with fine sand or silt may need changes closer to every 3 months.

### Why is my RO faucet slow but the rest of the house is fine?

The cause is usually inside the RO system: a worn filter, a membrane, or low pressure in the storage tank. We check system pressure and recharge the tank as needed.

### Can a new filter cause low pressure?

Yes, if the cartridge is too fine for the flow, the housing is seated wrong or a valve is partly closed. We can check the setup.

### Can you fix a system you did not install?

Yes. We service most water treatment equipment, even if it was not installed by us.

[More questions and answers](https://waterprosnv.com/faqs/)

### Sources (3)

- waterprosnv.com : [Water Pros: System Maintenance FAQ](https://waterprosnv.com/system-maintenance-2/) (checked November 2026)
- waterprosnv.com : [Water Pros: System Maintenance](https://waterprosnv.com/system-maintenence/) (checked November 2026)
- waterprosnv.com : [Water Pros: Service & Repair](https://waterprosnv.com/service-repair/) (checked November 2026)
